The SaniPass© Tunnel facilitates the disinfection of people and equipment through the creation of an atomised mist delivered through a series of fine-orifice dispersion nozzles.

The Sani Pass© Decontamination Tunnel is supplied as an easily assembled flat pack.
Flat pack dimensions: 2 500mm x 2 500mm x 300mm. Mass: 75gks.

• Width and height to allow for the passing of large objects such as trollies and carried items.
• Light weight and easy to assemble.
• Automatic pressure control valve maintains consistency of the pump pressure.
• Misting control intervals can be adjusted – minimum spraying time at 5 seconds.
• Solid non-slip flooring to ensure durability in high traffic areas.
• Automatic ON via infrared sensor with manual override.

Assembled Dimensions:

Length:  2 500mm
Height:  2 500mm
Width:  1 300mm
Mass – pump unit included:  75kg
Nozzles:  6 x 0.3mm brass misting nozzles with a flow rate of 300ml/min in total – continuous flow
Piping:  8mm OD PVC
Frame:  25mm x 25mm x 3mm aluminium square tubing
Side panels:  1.5mm Polycarbonate sheets – opaque
Floor:  3mm aluminium tread plate raised and supported by 25mm aluminium square base frame
Pump:  4 bar, 8lpm – 12volt diaphragm pump
Transformer:  220volt to 12volt supply
Supply cable: 10m with plug fitted

Cleaning and disinfection are important ways to help stop the spread of viruses.

HOCl is a weak acid and is considered a strong oxidizing agent responsible for the killing action of phagocytes against a variety of pathogens.

In general, weak acid hypochlorous solutions has practical applicability in such places as hospitals and establishments related to the food industry.

Hypochlorous acid (HOCl) solutions are not harmful to humans and considered suitable for use in disinfection mist tunnels, mask disinfection, as a nasal spray and as a general disinfectant including hand sanitising.

White Blood And Fat Resistant apron provides protection against the acids typically found in these substances as well as most chemicals food based oils. The PVC material is manufactured in South Africa and is of the highest standard and is resistant to cracking.

While providing additional primary protection to the wearer, they also extend the life of coveralls and similar types of PPE by providing protection against cuts, abrasions and general wear & tear.

They are also useful in providing initial protection in general cleaning and disinfecting operations.

Being easy to clean and disinfect, they are reusable.

Sold in packs of 25units/pack.

Pedestal style no-touch, hand sanitiser dispenser with lockable sanitiser bay.

Ideal for all access points where the public or staff enter a building.

The minimal metal construction means there is less chance of it landing up at a scrap metal dealer, while the internal wear components are made from stainless-steel for long-lasting rugged durability. With no electronic components you don’t need to worry about battery replacement costs.

Two options to choose from:

Wall-mounted version provides unobtrusive theft-resistance while the mobility of the Freestanding unit allows you to position it at your convenience. 

• Easily reloaded without hassle through the Clip & Drop design.
• Lockable sanitiser bay helps to contain consumable cost.
• No electronic components – fail safe mechanical design.
• Sleek and unobtrusive, it blends into the surroundings.
• Manufactured from tough, durable materials.
• Fail-safe mechanical design.

70% Alcohol based hand sanitiser.
Available in 5 litre screw-to bottle or 25 litre drum

The buffs are made from a fine nylon type stretchable fabric.

Their purpose is to reduce the risk of transmitting respirable aerosol droplets typically generated by talking, coughing, sneezing at low cost due their reusable nature, and in the absence of certified N95/FFP2 respirators.
They are supplied in flat-packs of 10 units per clear polybag.

Disposable 3-ply masks designed to protect against solids, water-based aerosols and oil-based aerosols.

These masks are manufactured according to the Government specifications.

Consisting of a 3-layer construction, both the outer & inner fabric layer are tightly woven 200 thread count percale cotton fabric & includes a pocket for a disposable inner filter, increasing the mask to 3 layers. One polypropylene disposable moister repellent filter is included with each mask.

The 200 Thread Count allows for a high yarn density of thread whilst still ensuring the mask fabric is breathable, lightweight, durable, soft & cool to wear. It is also suitable for those with sensitive skin.

The selection of a white colour fabric encourages frequent laundering required to maintain the hygienic properties of the mask and reduce the risk of incubating infectious agents.
Fitted with two head ties.

(Elastic ear tie version available subject to minimum order quantities.)

Additional polypropylene filters are available in packs of 120.
Replace your mask/filter if it is damaged. Masks are not returnable or refundable.

The suggested minimum issue per person is two.

Customised branding options available. Branding ensures you are easily able to distinguish between the inner layer and outer layer of the mask in order to prevent you from placing the wrong side against their faces.

Designed by a South African engineer active in the supply of medical products, this face shield is used to protect the wearer against contact from droplets and splashes of bodily fluids typically expelled during speech, coughing and sneezing.

Double head-band construction provides for a flexible comfort fit and ventilation to minimise fogging.

Simple elastic tensioner provides for a one-size-fits-all design.

• Easy to use with large display
• Less than 30 seconds quick detection with 1-5cm measuring distance
• Data storage of up to 32 records
• Single click measurement
• Suitable for babies, adults & surface objects
• Non-contact measurement method
• Auto-alarm once temperature reaches 38 degrees
• Conversion between Fahrenheit and Celsius
• Powered by 2 X AAA batteries (batteries not included)

Suitable for adults, babies and surface objects this highly sensitive thermometer offers a non-contact measurement method and has an auto alarm once temperature reaches 38 degrees.

With a back-light LCD display and conversion between degrees Fahrenheit and Celsius and a 30 second quick detection the thermometer will switch off automatically after 30 seconds of non-use.

The free-standing counter screen provides the ideal public engagement workplace barrier in the fight against bacteria and virus transmission through physical contact.

Used to protect both staff and customers from unintended droplet transmission typically expelled during speech, coughing and sneezing.

A cough can travel as fast as 80 km/h and expel almost 3,000 droplets in just one go. Sneezes are even more forceful —they can travel up to 160 km/h and create upwards of 100,000 droplets.

In situations where safe social distancing cannot be achieved a shield may help limit the spread of pathogens.

Barrier shields provide customers with an extra reassurance of safety and demonstrates an organisation’s dedication to the health of their staff.

Shields may also serve as a visual reminder to use proper hygiene to prevent the spread of COVID-19.

Standard sizes available:
500 x 500mm
600 x 600mm
750 x 680mm
1000 x 900mm

Contact us for a custom size or design.
Packs flat for easy shipping.

This emergency stretcher is supplied in a compact bag for easy storage and transportation and is manufactured from webbing reinforced rugged Cordura fabric. The six carrying handles allow for the easy transfer of patients.